No results were found for the filter!
Patch fitting top PT20 PLUS HD
BO 5216532
Suitably dimensioned cover cap for self-closing patch fitting Heavy Duty with plastic bushing for 15 mm diameter pin Glass thickness tempered glass 10, 12 mm
Keep GK50
BO 5214282
Glass thickness tempered glass 10, 12 mm When used as a centre lock on double doors, one door must be used as a slave door.
Keep
BO 5214284
When used as a centre lock on double doors, one door must be used as a slave door. Glass thickness tempered glass 10, 12 mm Size 53 x 40 mm
Cover Caps Clamp on frame profile two-piece
BO 5201755
Suitable cover caps for the two-part clamp-on profile for wall connection provide a neat finish.
Glass Door Hinge Alea 3-part with sleeve
BO 5206882
Glass door hinge with sleeve installation in frames according to DIN 18101 / 18111 rebate depth 24 mm (for 8 mm) / 26 mm (for 10 mm) Please order the suitable frame pivot separately. Glass thickness tempered glass 8 - 10 mm,...
Glass Door Hinge with Screw-On Plate square
BO 5206668
The frame-independent glass door hinge in classy, timeless design perfectly adapts to any frame and is very well suited for our Bohle FrameTec Select 2.0 glass partitioning systems. The aluminium door hinge was durability tested in line...
Glass Door Lock Olis DIN right Profile cylinder with rose
BO 5206836
Glass thickness tempered glass 8 - 10 mm, laminated glass 8.76 - 10.76 mm Lock prepared for profile cylinder Profile cylinder, 63 mm, for flush closure according to DIN 18257 tested according to DIN EN 12209 (latch permanent test...
Glass Door Lock Olis DIN left Profile cylinder with rose
BO 5206834
Glass thickness tempered glass 8 - 10 mm, laminated glass 8.76 - 10.76 mm Lock prepared for profile cylinder Profile cylinder, 63 mm, for flush closure according to DIN 18257 tested according to DIN EN 12209 (latch permanent test...
Glass Door Lock Olis DIN left Non locking
BO 5206826
Glass thickness tempered glass 8 - 10 mm, laminated glass 8.76 - 10.76 mm Latch, non locking tested according to DIN EN 12209 (latch permanent test 500,000 cycles, bolt closing test 100,000 cycles) tested according to DIN EN 1670...
Recently viewed