No results were found for the filter!
Overpanel Fitting with Screw-on plate PT30.3
BO 5214267
With pin ø15 mm Adjustable pivot (55/65 mm) Glass thickness tempered glass 10, 12 mm Mounting plate supplied loose
Self-closing Patch Fitting Standard Duty EN3
BO 5216521
The entire technology of the Self-closing Patch Fitting is itself housed in a subtly designed fitting. A floor recess is therefore not required in contrast to conventional floor-mounted door closers. It is assembled by simply screwing...
Swinging Door Hinge Bohle glass/glass 180°
BO 5210380
The self-closing double action door hinges from Bohle enable opening doors without much effort and closing them smoothly. When using swinging door hinges, two door stoppers must be used as end stops to prevent the door from swinging too...
Swinging Door Hinge Bohle glass/wall 90° Both Sides Wall...
BO 5210382
The self-closing double action door hinges from Bohle enable opening doors without much effort and closing them smoothly. When using swinging door hinges, two door stoppers must be used as end stops to prevent the door from swinging too...
Glass Door Lock Studio Private Line UV round For lever...
BO 5206805
The Studio glass door hinge stands out thanks to its high quality surfaces and a classy design for interior doors. It offers numerous advantages, such as wear resistant polyisocyanate springs, a noise absorbing whisper latch, a slimline...
Keep Studio Private Line, curved
BO 5206811
Keep for double doors and fixed glazing rebate depth 24 mm (for 8 mm) / 26 mm (for 10 mm) for use on DIN left and DIN right Glass deduction 4 mm
Glass Door Hinge Studio Private Line, curved 2-part with...
BO 5206813
Glass door hinge with sleeve installation in frames according to DIN 18101 / 18111 on request available with up to 45 mm frame rebate depth on application M6 stainless steel screws (torque setting 12 Nm) rebate depth 24 mm (for 8...
Keep Studio Private Line, square
BO 5206821
Keep for double doors and fixed glazing rebate depth 24 mm (for 8 mm) / 26 mm (for 10 mm) Glass thickness tempered glass 8, 10 mm for use on DIN left and DIN right Glass deduction 4 mm
Glass Door Hinge Studio Private Line, square 2-part with...
BO 5206823
Glass door hinge with sleeve installation in frames according to DIN 18101 / 18111 on request available with up to 45 mm frame rebate depth on application M6 stainless steel screws (torque setting 12 Nm) rebate depth 24 mm (for 8...
Recently viewed