Door fittings

Glass thickness tempered glass 8 - 10 mm, laminated glass 8.76 - 10.76 mm tested according to DIN EN 12209 (latch permanent test 500,000 cycles, bolt closing test 100,000 cycles) tested according to DIN EN 1670 (corrosion class 3)...

Glass thickness tempered glass 8 - 10 mm, laminated glass 8.76 - 10.76 mm tested according to DIN EN 12209 (latch permanent test 500,000 cycles, bolt closing test 100,000 cycles) tested according to DIN EN 1670 (corrosion class 3)...

The frame-independent glass door hinge in classy, timeless design perfectly adapts to any frame and is very well suited for our Bohle FrameTec Select 2.0 glass partitioning systems. The aluminium door hinge was durability tested in line...

The self-closing double action door hinges from Bohle enable opening doors without much effort and closing them smoothly. When using swinging door hinges, two door stoppers must be used as end stops to prevent the door from swinging too...

The self-closing double action door hinges from Bohle enable opening doors without much effort and closing them smoothly. When using swinging door hinges, two door stoppers must be used as end stops to prevent the door from swinging too...

The Studio glass door hinge stands out thanks to its high quality surfaces and a classy design for interior doors. It offers numerous advantages, such as wear resistant polyisocyanate springs, a noise absorbing whisper latch, a slimline...

Keep for double doors and fixed glazing rebate depth 24 mm (for 8 mm) / 26 mm (for 10 mm) for use on DIN left and DIN right Glass deduction 4 mm

Glass door hinge with sleeve installation in frames according to DIN 18101 / 18111 on request available with up to 45 mm frame rebate depth on application M6 stainless steel screws (torque setting 12 Nm) rebate depth 24 mm (for 8...

Keep for double doors and fixed glazing rebate depth 24 mm (for 8 mm) / 26 mm (for 10 mm) Glass thickness tempered glass 8, 10 mm for use on DIN left and DIN right Glass deduction 4 mm

Glass door hinge with sleeve installation in frames according to DIN 18101 / 18111 on request available with up to 45 mm frame rebate depth on application M6 stainless steel screws (torque setting 12 Nm) rebate depth 24 mm (for 8...