Accessories

Here you will find suitable wall mounting hardware for lipped plates. Please note that mirror magnets must only be used for tested metal plates with a thickness of 2 mm. All screws and dowels must be selected according to the substrate. Different kinds of spacers prevent the mirror from bending or increase the wall distance, e. g. for placing lighting elements behind the mirror. Please observe the corresponding mounting instructions as regards compatibility and distances, etc., for all accessories (lamps, mirror demisting pads, splinter protection films, etc.).

Close window

Accessories

Filter

12 Product(s)

No results were found for the filter!

Accessory Set Distance for Press Button Set safeclix®
BO 5208632

The spacers enable the mirror to be mounted with a wall distance of 30 mm. Many mirrors, especially in bathrooms, are equipped with lighting elements. The electric installations required for this purpose are usually concealed behind the...

Spacers Plinto
BO 5121100

The Plinto spacer is ideally suited for use with concealed mirror hanging systems. Thanks to the precise adjustment to the millimetre, mounting and aligning windows, doors and so on becomes as easy as can be. Plinto is available in two...

Eccentric disc
BO 5208602

Eccentric discs are supplied with adjustment scale. The necessary height adjustment (+/- 4 mm = 8 mm) can immediately be read from the front of the disc. Height 12 mm Diameter 37 mm Packaging unit 10 items

Press Button self-adhesive
BO 5208611

For fixing and securing of mirrors, whilst providing anti-jump and unhinging protection · self-adhesive · pull-off force of press button approx. 1.8 kg ± 0.3 kg Height 13 mm Diameter 50 mm Packaging unit 1 pc

Mirror magnets eccentric drill hole, 5 mm diameter
BO 5208601

The shear strength is calculated and tested for vertical mounting of mirrors with our metal plates of 2 mm thickness (see also "Note on the load capacity of the plates"). eccentric drill hole, 5 mm diameter Height 12.3 mm Diameter...