Mirror Adhesive

Mirror adhesives allow for the tension-absorbing bonding of mirrors on all common substrates. After mounting, the mirror must be supported until the adhesive has fully cured. Detaching the mirror is only possible by destroying the adhesive or the mirror. Please note the installation instructions when mounting the mirror to ensure a sufficient rear ventilation gap behind the mirror.

Close window

Mirror Adhesive

Filter

3 Product(s)

No results were found for the filter!

Mirror Adhesive Xtragrip® MS Polymer
BO 5730005

Xtragrip® MS Polymer is a mirror adhesive with a very good initial tack. It is suitable for tension-absorbing mirror bonding as per DIN EN 1036 on all common substrates. Xtragrip® MS Polymer stands out due to its fast curing speed of 2-3...

Mirror Adhesive Xtragrip®
BO 6002005

Xtragrip® is suitable for tension-absorbing mirror bonding as per DIN EN 1036 on all common substrates (except for PP, PE and PFTE). The silicone-based single-component adhesive is neutral, solvent-free and permanently elastic. Xtragrip®...

Primer Xtraprime
BO 6002006

Improves the adhesive capacity of Xtragrip® mirror adhesive on porous surfaces (also suitable for use with other silicone adhesives or MS polymers). Xtraprime is also recommended to prime surfaces subject to humidity. Xtraprime is thin...