No results were found for the filter!
Diamond Core Drills with Countersink, Industrial Quality
BO 5001605
For the highest requirements · high drilling capacity and service life · drill base made of stainless steel · diamond coating from sintered material · with slots for better cooling · pre-sharpened, ready-to-use · special dimensions on...
Diamond Core Drills, Standard Quality
BO 5000403
For normal use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · drill has to be sharpened before first use Outer thread (Continental) R 1/2"
Diamond Core Drill with Countersink, Standard Quality
BO 5000604
For normal use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · countersink is fixed by lateral clamping screw · drill has to be sharpened before first use. Outer thread...
Set of Diamond Hollow Drills for Ceramic
BO 79.361
With one ceramic diamond hollow drill each with diameters of 6, 8, 10 and 12 mm · drill core ejector and pin for releasing tight drills
Sharpening Stone for Diamond Drills
BO 5000499
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, use the dressing stone first...
Diamond Drill Box / Empty box
BO 79.360
For safely storing 4 diamond hollow drills for ceramic (not included) BO 79.3606 up to BO 79.3612 · includes drill core ejector and pin for releasing tight drills
Dressing Stone for Diamond Drills
BO 5000498
Removes used particles and creates a new cutting edge · after using the dressing stone, sharpen the drill with sharpening stone BO 5000499 · when drills are operated with little forward feed, no self-sharpening process takes place and...
Precision Drill Extension
BO 5000504
For R 1/2" diamond hollow drills - ranging from 75 mm to 95 mm · industrial quality, stainless steel
Recently viewed