232
Product(s)
No results were found for the filter!
BO 88.01
The tendency towards increasingly larger glass constructions in architecture and the growing use of 2-gap insulating glass pose new challenges for glass processors and assemblers: Elements which could previously be moved by two people...
BO 5310082
Without naps in the centre For Velcro diamond discs and felt polishing discs
BO 5318018
These soft, waterproof belts contain very tough, synthetic abrasive particles of high resistance (corundum). They produce a relatively clear grinding result (the glass edge keeps its "green colour"). Many applications do not require...
BO 5001806
The quality demands placed on deeply countersunk bores in combination with shorter cycle times per countersink have continually grown, particularly in the fields of facade construction and interior fit-out. Bohle has now brought its...
BO 79.350
Optimum cooling for break-proof drilling · permanent water supply and drainage · special exchangeable drill bushings for 6, 8, 10 and 12 mm diameters · includes storage case
BO 79.351
With vacuum suction holder and adjustable drill plate Drill diameters 6, 8, 10, 12 mm
BO 79.352
With vacuum suction holders and adjustable universal drill guide Diameter adjustable 20 - 70 mm
BO 79.B1262
Independent water supply · integrated pressure gauge · plug-in coupling for direct connection to Aqua Drill (BO 79.300, BO 79.302 + BO 79.303) · length of connecting hose 3 m Safety valve 4 bar
BO 79.12
With MK2 morse taper · for diamond hollow drills with 1/2" thread Spanner 32 mm
BO 79.BG095
Stainless steel shaft · for diamond drills with 1/2" thread · fits drill stand BO 760.5 and all standard drilling machines with 43 mm collar diameter Spanner 24 mm
BO 5007903
High quality liquid cerium suspension. The real alternative to cerium polishing powder, pre-mixed and immediately ready for use. Shake polishing liquid well before use; produces shiny glass surfaces when used together with felt polishing...
BO 50028304
The pH value of the coolant in grinding and drilling equipment should never exceed 9.5 as this might lead to increased corrosion and chemical burns on skin. Please note: recommended use approx. 3% Vetrocool, and the pH value stays...
Recently viewed