Mirrors can be attached with the mirror plates so that the fixings are invisible to the customer, and the mirror can be removed again at any time. The mirror plates are self-adhesive and suitable for use in bathrooms. Installation is quick and does not require special tools.
Accessories such as wall fixings, spacers and anti-hanging devices are available in several variants and can be selected to suit. The sheets must not be used as load-bearing sheets in combination with magnets. Sheets with a thickness of 2 mm are required for this purpose.
Not suitable for use on splinter protection films or adhesive tapes. These must be cut out in the area of the plate.
Application note:
Observe the processing instructions and the relevant technical guidelines and standards. Not suitable for outdoor use. Always use two sheets per mirror.
