Overpanel fitting PT 30.3 with bolt Ø 15 mm is inserted into corner fitting PT 20 and thus connects overpanel and door in an all-glass system. The screw-on plate for wall mounting is included in the scope of delivery. The pivot point can be set to 55 or 65 mm.
Whether single or double-leaf doors, the combination with overpanels and/or side panels... there are many ways to create a bright and open atmosphere with a room divider in private, commercial or public spaces. Can be designed as either a swing or a stop door
Application note:
The glass cut-out is dimensioned for a wall distance of 6 mm - if the wall distance differs, the glass cut-out must be adjusted accordingly.
Please use the following insert combinations for the following glass thicknesses:
2 x 2 mm for 10 mm glass
2 x 1 mm for 12 mm glass
