With UV activator 30, UV adhesive B-682-T can also be cured without a UV lamp. Bonding of metal parts with suitable coloured glass, screen-printed coated glass or metal-to-metal joints is possible. An additional UV lamp is not required.
The UV activator 30 is applied in a thin layer to one of the two parts to be joined. The curing of the adhesive starts after 30 seconds and is completed after 24 hours. The strength of the adhesive does not decrease when UV Activator 30 is applied correctly. The bond will always yellow slightly, therefore the application is not recommended for visible bonded areas.
Application note:
Observe the safety data sheet, the processing instructions and the relevant technical guidelines and standards
