No results were found for the filter!
Diamond Hollow Drills for Ceramic
BO 79.4605
Developed especially for the Bohle Aqua Drill wet drilling machine · manual drill bit exchange without tools · for drilling hard ceramic tiles, granite, marble and regular tiles Belgian thread 1/2" Speed ranges: 0 - 400 rpm – ø40 to...
Diamond Countersinks, Industrial Quality
BO 5001570
The optimized spiral form follows function - means inside sintered 6mm thick diamond section are spiral form slots for coolant water and glass abrasion sludge. Outer thread (Continental) R 1/2"
Victory diamond countersink
BO 5001550E
Diamond countersink Ø 15/50 mm, slotted/5 section, industrial standard, 1/2" connection thread Outer thread (Continental) R 1/2"
Diamond Core Drills with Deep Countersink, Industrial...
BO 5001806
The quality demands placed on deeply countersunk bores in combination with shorter cycle times per countersink have continually grown, particularly in the fields of facade construction and interior fit-out. Bohle has now brought its...
Mono Block Drill / Countersink in all Desired Dimensions
BO 5014H40U
For high quality requirements, and with excellent cutting characteristics, the upper drill diameter is 0.2mm bigger than the lower drill giving an absolutely continuous drill hole - when all machine specifications are observed the drill...
Segmental Diamond Drills
BO 5004100
Adjustable · with exchangeable segments · central bore hole for coolant supply Connection thread (Continental) R 1/2"
Grinding Cone Holder
BO 79.610
Elastic Vulkozell® body · transverse slits for attaching and exchanging the grinding cones BO 79.6120 (ø60 mm) / BO 79.9120 (ø90 mm) · Made in Germany Shaft ø 6 mm
Grinding Cone
BO 79.6120
The grinding cone is used to arris drilled holes and cut-outs in glass or similar materials such as ceramic or stone. It can be used on machines suitable for wet working, e.g. cordless drivers or pneumatic power drills, which rotate...
Diamond Hollow Drills for Ceramic
BO 79.3605
Developed especially for the Bohle Aqua Drill wet drilling machine · manual drill bit exchange without tools · for drilling hard ceramic tiles, granite, marble and regular tiles Belgian thread 1/2"
Set of Diamond Hollow Drills for Ceramic
BO 79.361
With one ceramic diamond hollow drill each with diameters of 6, 8, 10 and 12 mm · drill core ejector and pin for releasing tight drills
Diamond Drill Box / Empty box
BO 79.360
For safely storing 4 diamond hollow drills for ceramic (not included) BO 79.3606 up to BO 79.3612 · includes drill core ejector and pin for releasing tight drills
Recently viewed