No results were found for the filter!
Diamond Hollow Drills for Ceramic
BO 79.4605
Developed especially for the Bohle Aqua Drill wet drilling machine · manual drill bit exchange without tools · for drilling hard ceramic tiles, granite, marble and regular tiles Belgian thread 1/2" Speed ranges: 0 - 400 rpm – ø40 to...
Diamond Countersinks, Industrial Quality
BO 5001570
The optimized spiral form follows function - means inside sintered 6mm thick diamond section are spiral form slots for coolant water and glass abrasion sludge. Outer thread (Continental) R 1/2"
Sharpening Stone for Diamond Drills
BO 5000499B
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, use the dressing stone first ·...
Victory diamond countersink
BO 5001550E
Diamond countersink Ø 15/50 mm, slotted/5 section, industrial standard, 1/2" connection thread Outer thread (Continental) R 1/2"
Grinding Cone Holder
BO 79.610
Elastic Vulkozell® body · transverse slits for attaching and exchanging the grinding cones BO 79.6120 (ø60 mm) / BO 79.9120 (ø90 mm) · Made in Germany Shaft ø 6 mm
Grinding Cone
BO 79.6120
The grinding cone is used to arris drilled holes and cut-outs in glass or similar materials such as ceramic or stone. It can be used on machines suitable for wet working, e.g. cordless drivers or pneumatic power drills, which rotate...
Spear Point Glass Drill
BO 5000205
Specially ground carbide tip with specially sharpened tip for precise drilling results Finish chromate
Diamond Core Drills, Standard Quality
BO 5000403
For normal use · drill base made of steel · covered with protective lacquer · diamond coating from sintered material · drill has to be sharpened before first use Outer thread (Continental) R 1/2"
Standard-Diamanthohlbohrer mit Senkring
BO 5000604
Für normale Beanspruchung · Basismaterial: Stahl · mit Schutzlack versehen · Diamantbelag aus gesintertem Material · Senkring wird durch seitliche Klemmschraube fixiert · Bohrer muss vor der ersten Benutzung geschärft werden....
Set of Diamond Hollow Drills for Ceramic
BO 79.361
With one ceramic diamond hollow drill each with diameters of 6, 8, 10 and 12 mm · drill core ejector and pin for releasing tight drills
Sharpening Stone for Diamond Drills
BO 5000499
By drilling powerfully into the sharpening stone a few times, new spaces are created between the diamond particles, leading to renewed cutting ability · if sharpening does not lead to a positive result, use the dressing stone first...
Recently viewed